#Whirlpool dryer heating element replace how to#

If the element doesn’t have continuity, this proves it’s defective and needs to be replaced. Test the resistance of the heating element to ensure it is faulty and needs to be replaced.If they do have continuity, they can be reused with the new heating element. If the sensors don’t have continuity, they will need to be replaced. Test the resistance of the two sensors.If it does have continuity, it can be reused with the new heating element. If the fuse doesn’t have continuity, it will need to be replaced. Test the resistance of the fuse with your multimeter.

#Whirlpool dryer heating element replace how to#

Here’s how to test the electrical components: If you don’t have a multimeter, you can proceed directly to step four.

This step is optional and is only necessary if you have a multimeter so that you can test the sensors, fuse, and element to ensure they are all working correctly.

If any screws are securing the housing unit in place, remove them, and you should be able to remove the housing and have access to the element.

The fuse can be removed by disconnecting it and removing the screws that secure it in place.

After the two sensors have been safely removed and placed out of the way, locate the heating fuse on the left-hand side of the housing unit.

Once the sensor on the top has been removed, locate the sensor at the bottom of the unit, and remove it exactly how you removed the first one.

Once removed, place it safely out of the way, as you’ll need to reattach it after you’ve replaced the heating element. If you find a sensor, remove it by first disconnecting the wires and then the screw that holds it in place. On the top of the unit should be a sensor.

Locate the housing unit that protects the heating element.

Once removed, place it safely out of the way. The back panel should now clip out of position and be able to be removed.

Once located, remove the screws that hold it in place, and set them aside.

When pulling the dryer out, you will probably need to remove the exhaust hose from the appliance if you have one attached. Once the power is turned off, pull your dryer out from the wall so you can gain access to the back of the appliance. This can be done by switching it off at the wall or turning the circuit breaker off in your household circuit breaker box. Start by turning the power off to your dryer. Simply start with step one, and work your way through each subsequent step. These steps should work for all major models of dryers, such as Maytag, Whirlpool, GE, Bosch, and Samsung. In this article, we will give you step-by-step instructions for how to do it so you can get your dryer working again. Replacing a dryer heating element is thankfully a straightforward task.